|
This Superlift K358 suspension lift for the 2000-2009 Ford Ranger 4x4 is designed to provide between 3" and 4" of front suspension lift over stock height. Please note, if you have already cranked up your torsion bars this lift will only provide approximately 3" inches of additional lift, not 4 as advertised. Now that RCD has discontinued their 5.5" coilover suspension lift this Superlift kit is really the only suspension lift kit we can recommend. This lift will fit all 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009 model year Ranger pickup trucks built on the 4x4 Chassis. This kit will NOT fit 2wd models! The Ford Ranger is basically a smaller version of the 1997-2003 F-150. Both trucks use a torsion bar and upper / lower control arm design. The Superlift Ranger lift kit uses a similar design to the F150 and includes a pair of cast nodular iron knuckles. One key difference with the mid-size Ford Ranger is the odd tulip-style front driveshaft used for the front differential. Superlift has found that the factory Ford Ranger driveshafts wear rapidly after the vehicle is lifted and cause vibration over time. Expect the original stock front driveshaft to last no more than 20,000 miles after the vehicle is lifted. Superlift offers a heavy-duty replacement front driveshaft that incorporates a standard CV joint at the transfer case for improved durability and longevity. This Superlift K358 kit includes a set of 4 Superlift SuperRide series shock absorbers. This is a complete front and rear lift system that includes a set of detailed instructions. If you have any questions regarding this or any other Superlift Suspension product we kindly request you click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to any address in the lower 48 United States of America!
|
