|
This CST CSS-N1-1 4" lift spindle is designed to fit all 2004, 2005, 2006, 2007, 2008, 2009, 2010 and 2011 Nissan Titan 2wd trucks. This lift spindle kit will NOT fit any 4x4 Titan! Owners of the 2wd Titan trucks have been asking for an inexpensive and smooth riding suspension lift, well here it is. This CST 4" lift spindle provides additional lift to clear larger tires and increases ground clearance under the front crossmember by a full four inches. And even better, because the factory front springs and struts are retained, these lift spindles will retain the factory ride. The best of both worlds, a smooth factory ride and 4" of lift. And you can easily return your Titan to stock height if the need arises. The truck shown in the picture is running 315/70R17 BFG All-Terrain tires on 17x9" wheels. Please note, the CST 4" lift spindle will work with factory Nissan wheels but tire width must be limited to 11.50" inches. The use of a wider tire will require an aftermarket wheel with no more than 5.00" inches of back space. The CST 4" lift spindle for the 2wd Nissan Titan is easy to install and can be reverted back to stock at any time. No modifications, cutting, or welding is required to install. This item can be installed in as little as two hours using basic automotive tools. A professional alignment is recommended to ensure proper handling and tire wear. Basic Package Includes:
CST 4" Lift Spindles
CST Front Brake Hose Kit
Rear Block Lift
U-Bolt Kit & Hardware
Bilstein Rear Shocks That's right, for just under $1100 bucks you can get a true 4" suspension lift that's easy to install and rides great! Even better, you can easily uprade from the Basic kit to the Performance Package at any time in the future! IMPORTANT!
If you install a 3" or taller rear lift you may need to install a Carrier Bearing Drop Bracket kit, aka CBDB. This carrier bearing drop bracket will eliminate the rear driveshaft vibration caused when the rear suspension is lifted. CST offers the nicest and easiest to install carrier bearing spacer kit available. Trust us, if you run a 3" or taller block you'll most likely need this part! The carrier bearing drop bracket can be purchased separately using the drop down boxes located beneath this item description. Owners of 2008 and newer model year Nissan Titan trucks will require slightly more rear lift than previous model year trucks to achieve a level stance. On newer 2008+ Titan trucks a 4" front lift will most likely require 2.50" to 3.00" inches of rear lift to achieve a level stance. For more information please click on the "ask a question" link located at the very top of this page. This item ships for FREE via standard ground service to all addresses located in the 48 contiguous United States of America!
|
