|
August 4, 2010 - This item is in stock and ready for immediate shipment! Bilstein F4-BE5-E523-H0 This Bilstein Adjustable Lift Height shock absorber can provide your 2006, 2007, of 2008 Dodge Ram 1500 4x4 with up to four different lift height positions. By positioning the lower coil spring seat on one of four grooves you can achieve 0" of lift (stock height), a .67" lift, 1.34" lift, or 2.00" inches of lift over stock height. The primary advantage to using the Bilstein adjustable height leveling shock is it helps to improve the ride and handling more than a basic spacer leveling kit does. This Bilstein adjustable lift shock will not allow the suspension to over-extend, something that is common with typical strut spacers. Even if you aren't looking to lift your Ram the ride quality and handling benefits that the Bilstein BE5-E523-H0 provide make installation a very worthwhile upgrade. Bilstein offers a limited lifetime warranty on this product and that means it could very well be the last set of shocks you'll ever need to purchase for your Ram! PerformanceLifts.com sells these shocks in pairs. We also offer matching Bilstein rear shock absorbers, part number BE5-6682-H6, that are designed and valved to compliment the front shocks. Please note, installation of the front shock will require the use of a strut or spring compressor as you must transfer the factory coil spring over to the Bilstein shock body. The springs and hardware shown in the picture are NOT included. You will reuse your factory coil springs and the hardware during installation of this Bilstein shock. This item will NOT fit any Ram 1500 MegaCab models! This item is only for use on 2006-2008 model year Ram 1500 4x4 trucks. Will NOT fit any 2wd models! For more information on this or any other Bilstein product please click on the "ask a question" link located at the very top of this page. This item is sold in pairs!
|
